Causes of damage to miniature bearings and solutions to bearing heating

2025-11-11 10:19

1. Causes of Micro Bearing Damage and Shutdown

Approximately 40% of micro ball bearing failures are caused by contamination from dust, dirt, debris, and corrosion. Contamination typically results from improper use and harsh operating environments, and it can also lead to issues with torque and noise. Bearing failures induced by environment and contamination are preventable, and the root causes can be identified through simple visual inspection.
Bearing spalling can be easily avoided with proper use and installation. Spalling is characterized by indentations on the bearing ring raceways, which are caused by impact loads or incorrect installation. It usually occurs when the load exceeds the material's yield limit. Spalling can also happen if improper installation results in transverse loading on the bearing ring. Additionally, pits on the bearing ring can cause noise, vibration, and additional torque.

2. Causes of Micro Bearing Overheating and Solutions

Solutions for bearing overheating vary depending on the specific causes. Below are the recommended remedies for excessive micro bearing temperatures:

2.1 Grease Packing Method

This is a common grease lubrication method that involves periodically applying an appropriate amount of grease to the bearing's working surfaces.

2.2 Oil Cup Method

A grease lubrication method where a screw-cap or pressure oil cup is installed on the bearing housing. Grease is injected regularly by turning the cap or using a grease gun, and it is also a widely used grease lubrication method.

2.3 Pressure Grease Supply Method

This method relies on a grease pump for lubrication. Grease with good fluidity should be selected for this application.

2.4 Centralized Grease Supply Method

This method uses a grease pump to deliver grease to multiple deep groove ball bearings and other components simultaneously. Similar to the pressure grease supply method, it requires grease with good fluidity, oxidation resistance, and corrosion resistance.

Key Terminology Explanation

  • Micro bearing: Industry-standard term for "微型轴承", referring to small-sized bearings used in precision equipment.

  • Spalling: Professional term for "剥蚀", describing the phenomenon of material flaking on bearing raceways due to excessive loads or improper installation.

  • Raceway: Technical term for "滚道", the contact surface on bearing rings where balls or rollers operate.

  • Deep groove ball bearing: Standard translation for "深沟球轴承", a common type of rolling bearing with wide applicability.